Checking the Free Hard Disk Space
Check the space available on the printer's hard disk as follows.
This operation is available from the Control Panel, in RemoteUI, imagePROGRAF Status Monitor, and imagePROGRAF
Printmonitor.
Using the Control Panel
1. On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to select the Job tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2. Press the OK button.
The Job Menu is displayed.
3. Press â–² or â–¼ to select HDD Information, and then press the OK button.
Using RemoteUI
To view the box list, select Stored Job in Job Management. On the Stored Job page, the free hard disk space is shown in
the upper-right corner when boxes are listed.
For details, refer to the RemoteUI help file.
Printer Parts
>
Hard Disk
>
Checking the Free Hard Disk Space iPF6300S
8
884
To Next Page
Loading...
Need help?
General