Choosing Paper for Printing
Choosing a Paper for Printing ........................................................................................................................... 21
Specifying Paper in the Printer Driver ............................................................................................................... 21
Choosing a Paper for Printing
Choosing the right paper for your particular printing application will give you the best printing results.
• Media Type
The printer and printer driver offer print settings optimized for various paper characteristics.
Note
• For information on the types of paper the printer supports, refer to the Paper Reference Guide.(See
"Types of Paper →P.773 ")
• The types of paper indicated in the printer driver and related software (as well as on the Control Panel )
are updated when you install the Media Configuration Tool from the User Software CD-ROM or if you
change paper information by using the Media Configuration Tool. For information about the Media
Configuration Tool, see the Media Configuration Tool →P.447 (Windows) or Media Configuration
Tool →P.676 (Macintosh).
• An error message may be displayed on the printer Control Panel if the type of paper as specified in the
printer driver does not match the type specified on the printer. Although you can print under these con-
ditions, the printing results may not be suitable.
• If the paper type is not listed for selection
If the type of paper loaded cannot be selected, try specifying glossy paper or proofing paper as a special paper (Special
1 to Special 5, in this order). BK ( Black Ink ) is used as the black ink. Try specifying other types of paper as Special 6
to Special 10. MBK ( Matte Black Ink ) is used as the black ink. Note that higher numbers in this setting enable more
vivid colors but may also cause colors to run together.
Furthermore, Register Custom Paper can also be performed using the Media Configuration Tool.
For information about the Media Configuration Tool, see Media Configuration Tool →P.447 (Windows) or Media
Configuration Tool →P.676 (Macintosh).
For instructions on specifying the paper type before printing, refer to the following topics.
• Changing the Type of Paper →P.787
Specifying Paper in the Printer Driver
If you replace the paper, complete the printer driver settings for the paper type and size.
For instructions on configuring paper settings in the printer driver, refer to the following topics, as appropriate for your
computer and operating system.
• Specifying Paper in the Printer Driver (Windows) →P.204
• Specifying Paper in the Printer Driver (Mac OS X) →P.488
Enhanced Printing Options
>
Choosing Paper for Printing
>
iPF6300S Choosing a Paper for Printing
2
21
To Next Page
Loading...
Need help?
General