Canon imagePROGRAF iPF6300S Basic Guide No.2 User Manual

Print area Normal size 3 mm (0.12 in) from each side
For information on the recommended print
area, see "Print Area." →P.1081
Borderless printing (*2 →P.1081 ) Printable area (rolls)
0 mm from the top, 0 mm from the bottom,
and 0 mm from the left and right sides
Supported width for borderless printing 10-in. Roll (254.0mm), JIS B4 Roll
(257.0mm), 14-in. Roll (355.6mm), 16-in.
Roll (406.4mm), ISO A2/A3 Roll (420.0mm)
(*3 →P.1081 ), 17-in. Roll (431.8mm), JIS
B2/B3 Roll (515.0mm), ISO A1/A2 Roll
(594.0mm) (*3 →P.1081 ), 24-in. Roll
(609.6mm)
*1: Varies depending on the operating system or application.
*2: Printing may not be possible in some cases, depending on the type and size of paper.
*3: Borderless printing requires the Spacer for Borderless Printing.
*4: POP Board, etc. for heavyweight paper.
Hard Disk
Hard disk capacity 160 GB
Personal mail boxes (Permanent stor-
age area)
92 GB
Print job storage capacity Common Box 100 jobs
Personal Boxes 100 jobs
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless print-
ing, the actual printing area corresponds to the paper size minus the space for this margin.
Printable Area Recommended Print Area
Top Edge Bottom Edge Sides Top Edge
Bottom
Edge
Sides
Sheets Top Pa-
per Feed
Slot
3 mm (0.12
in)
3 or 23 mm
(0.12 or 0.91
in)
3 mm (0.12
in)
20 mm
(0.79 in)
23 mm (0.91
in)
5 mm (0.20
in)
Front Pa-
per Feed
Slot
3 mm (0.12
in)
23 mm (0.91
in)
3 mm (0.12
in)
Rolls 0 or 3 mm (0
or 0.12 in)
0 or 3 mm (0
or 0.12 in)
0 or 3 mm (0
or 0.12 in)
20 mm
(0.79 in)
5 mm (0.20
in)
5 mm (0.20
in)
Specifications > Printer Specifications >
iPF6300S Print Area
14
1081

Canon imagePROGRAF iPF6300S Basic Guide No.2 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S Basic Guide No.2
Category	Printer
Language	English