Cause Corrective Action
An error requiring service may have occurred. Turn off the printer and wait at least three seconds be-
fore restoring the power.
If the message is displayed again, write down the error
code and message, turn off the printer, and contact your
Canon dealer for assistance.
Prepare for parts replacement.
Cause Corrective Action
It is almost time to replace consuma-
bles for which service is required.
If "Parts replacement time has passed." is displayed, you can continue to
use the printer for some time.
Contact your Canon dealer for assistance.
Parts replacement time has passed.
Cause Corrective Action
It is past the recommended time to replace consumables for which service
is required.
Contact your Canon dealer for assistance.
Unknown file.
Cause Corrective Action
Data sent to keep the printer up to date (such as
paper information) is in the wrong format.
Check the data. Turn off the printer and wait a while before restor-
ing power, and then resend the data.
You have uploaded firmware for a different
model.
Check the firmware version. Turn off the printer and wait a while
before restoring power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for as-
sistance.
Calibration There is a problem with the multi-sensor.
Cause
Corrective Action
The performance of a sensor inside the printer
may be impaired.
Press the OK button and cancel calibration. Contact your Canon
dealer for assistance.
Error Message
>
Other Messages
>
iPF6300S Prepare for parts replacement.
13
1075
To Next Page
Loading...
Need help?
General