Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X)
By automatic enlargement of a document created with an application software by the printer driver, you can print maximum
18.0 m vertical or horizontal banners.
This topic describes how to print a banner about five times as long as the roll width based on the following example.
• Document: An original designed for a horizontal banner
• Page Size: Non-standard (100×500 mm [3.9×19.7 in])
• Paper: Roll
• Paper type: Plain Paper
• Roll paper width: 16 inches (406.4 mm)
The print procedure is as follows.
1. In the application, create an original in the format of a horizontal or vertical banner.
2. In Page Setup, register Custom Page Sizes (Mac OS X 10.4.11–10.5) / Custom Paper Sizes (Mac OS X 10.6).
Once you register Custom Page Sizes / Custom Paper Sizes, you then can select it repeatedly from the paper size list.
Custom Page Sizes / Custom Paper Sizes can be set up to 18.0 m.
3. Print the banner, using the settings that correspond to banners.
Note
• The following procedures are based on Mac OS X 10.5. The method of setting up non-standard paper sizes
varies depending on the version of Mac OS X.
Register a Custom Page Sizes
This example describes how to register and print using a page size that is horizontally elongated and suitable for banners in
either horizontal or vertical format.
1. Create the document in the application.
2. Choose Print in the application menu.
3. Select the printer in the A Printer list.
Enhanced Printing Options
>
Printing banners or at other non-standard sizes
>
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X) iPF6300S
2
128
To Next Page
Loading...
Need help?
General