Canon imagePROGRAF iPF6300S Basic Guide No.2 User Manual

3. In the Paper Detailed Settings dialog box displayed next, select the desired settings values in C Between Pages
and D Between Scans in B Drying Time, and then click OK.
(See "Paper Detailed Settings Dialog Box (Mac OS X).") →P.500
Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Cutting Method Printer Setting Driver Setting
Automatic The roll is automatically cut by the Cutter Unit
following printer driver settings.
Media
Menu >
Paper
Details >
(Various
Types of
Paper) >
Cutting
Mode
Automat-
ic
Auto Cut
(See
"Cutting
Roll Pa-
per After
Printing.")
→P.196
Yes
Eject
→P.798
Select this to move the cutter by key operation
and cut paper. Although there are cases with
Automatic in which the paper falls and the pa-
per surface is scratched when the paper rubs the
Output Stacker, you can avoid damaging the pa-
per with this method since you can cut by hold-
ing the paper with your hand so that the paper
does not fall when cutting, Also, since you can
cut while visually confirming the drying of the
ink, you can avoid ejecting paper before the ink
has dried.
To cut the roll with the Cutter Unit, press the
Cut button.
Eject Yes
Man-
ual
→P.800
Choose this setting when using media that can-
not be cut using the Cutter Unit.
Manual No Yes Print
Cut Guideline
Handling Paper > Handling rolls >
iPF6300S Specifying the Cutting Method for Rolls
6
797

Canon imagePROGRAF iPF6300S Basic Guide No.2 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S Basic Guide No.2
Category	Printer
Language	English