Canon XF605 User Manual

Using Metadata
102
Using Metadata
The camera automatically adds metadata to the recorded clips. You can use Canon XF Utility to check and
search for specific metadata. You can also add News Metadata to the recorded clips (A 103).
Metadata components
1
User memo files need to be created using the software and saved on an SD card in advance.
2
Only when a GP-E2 GPS Receiver is connected to the camera. While recording, GPS information is recorded automatically by
the camera.
3
GPS information can only be added to clips already recorded.
4
Only in CAMERA mode.
5
Recording data is logged automatically by the camera.
Setting a User Memo Created with Canon XF Utility
Before you can add a user memo, you must first install Canon XF Utility (A 154). Next, create the user memo
and then save it to an SD card. Once you insert the SD card in the camera and select the user memo, it will be
added to clips you record.
1Use Canon XF Utility to save a user memo to an SD card.
• For details, refer to Managing User Memo Profiles in the Canon XF Utility Instruction Manual.
2Insert the SD card into the camera’s SD card slot B.
3 Select > [
Æ Recording/Media Setup] > [Metadata] > [Add XML File] > [On].
4 Select > [Æ Recording/Media Setup] > [Metadata] > [XML File Format] > [User Memo].
5 Select > [Æ Recording/Media Setup] > [Metadata] > [User Memo] > Desired user memo file.
•The Q icon appears on the left of the screen. (only when [¢ Monitoring Setup] > [Custom Display 2] >
[User Memo] is set to [On].)
NOTES
NOTES
• After you set a user memo, do not remove SD card B while you are recording. If the SD card is removed, the
user memo will not be added to the clip.
• You must set the user memo before you start recording for it to be added to the clips. You cannot change the user
memo already added to a clip using the camera but you can do so with Canon XF Utility.
Metadata
Entering content Checking content
Camera
Canon XF
utility
Smartphone
application
Camera
Canon XF
utility
Smartphone
application
User Memo: clip title, creator, location and description. – Ü
1
– Ü Ü –
GPS information: altitude, latitude and longitude. Ü
2
Ü
3
– Ü Ü –
Information about the recording: scene and take. Ü – – Ü
4
Ü –
Information about camera settings: shutter speed, ISO
speed/gain value, etc.
–
5
– – Ü Ü –
Unique Material Identifiers (UMID): country, organization
and user codes based on the SMPTE standard.
Ü
(A 189)
– – Ü
4
– –
News Metadata (A 103) – – Ü Ü – Ü

Canon XF605 Specifications

General

Sensor type	CMOS
Total megapixels	13.4 MP
Optical sensor size	1/1 \
Filter size	58 mm
Optical zoom	15 x
Image stabilizer	Yes
Image stabilizer type	Optical Image Stabilization (OIS)
Maximum aperture number	2.8
Focal length (35mm film equivalent)	25.5 - 382.5 mm
3D	No
Camcorder type	Handheld camcorder
Image processor	DIGIC DV 7
Remotely operated	-
Minimum illumination	1.5 lx
Focus adjustment	Auto/Manual
Memory slots	2
Camcorder media type	Memory card
Compatible memory cards	SD, SDHC, SDXC
Maximum memory card size	- GB
Product color	Black
Video resolutions	1280 x 720, 1920 x 1080, 3840 x 2160 pixels
Maximum frame rate	120 fps
Video formats supported	H.265, MP4, MPEG4, MXF
Maximum video resolution	3840 x 2160 pixels
Analog signal format system	NTSC, PAL
Image formats supported	JPEG
Headphone outputs	1
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	0
Display diagonal	3.5 \
Viewfinder type	Optical
PCM digital audio	16-bit/48 kHz
Camera shutter speed	1/2000 s
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Storage temperature (T-T)	-5 - 45 °C
Operating temperature (T-T)	0 - 40 °C
ISO sensitivity	200, 12800, Auto
Battery capacity	- mAh
Battery life (max)	2.5 h
Video recording time	- h
Number of diaphragm blades	9

Weight and Dimensions

Depth	173 mm
Width	168 mm
Height	333 mm
Weight	2010 g