Canon XF605 User Manual

29
Preparing the Camera
Lens Diffraction Correction
The image produced may not be as sharp at certain apertures (lens diffraction), in which case, you can apply a
correction to compensate as necessary.
1 Turn on the camera in CAMERA mode.
2 Select > [
v Camera Setup] > [Diffraction Correction] > [On].
• The camera will apply the correction for the attached lens to all future recordings.
Using the Viewfinder
The camera's viewfinder features an OLED screen that turns on automatically when you look through the
viewfinder and turns off shortly after you move your eye away from it.
Adjusting the Viewfinder
1 Adjust the viewfinder’s angle as necessary.
2 Turn on the camera and adjust the dioptric adjustment
lever until the viewfinder’s image is sharp.
NOTES
• You can adjust the brightness, contrast, color
saturation, sharpness and luminance of the viewfinder
with the respective settings in the >
[
¢ Monitoring Setup] menu (A 190).
• In CAMERA mode, you can use the >
[
¢ Monitoring Setup] > [B&W Image: VF] setting to change the image on the screen to black and white
display. Even when the captured image is displayed in black and white, onscreen displays and icons will be
shown in color.
• Adjusting the brightness does not affect the brightness of recordings.
• You can turn on the viewfinder permanently by setting > [
¢ Monitoring Setup] > [VF Eye Sensor] to
[Off].
Reducing the Viewfinder's Image Shaking
You can reduce the image shaking on the viewfinder caused when the set frame rate is low, and the camera is
moved horizontally.
Select > [
¢ Monitoring Setup] > [Run VF at x2 Speed] > [On].
NOTES
• The [Run VF at x2 Speed] setting cannot be used in the following cases.
- When the recording mode is set to an option other than normal recording or pre-recording.
- When the frame rate is set to an option other than 29.97P / 25.00P / 23.98P.
- In MEDIA mode.
• The [Run VF at x2 Speed] setting cannot be changed while you are recording (while [Ü REC] appears on the
screen).
햲
햳
Dioptric
adjustment lever

Canon XF605 Specifications

General

Sensor type	CMOS
Total megapixels	13.4 MP
Optical sensor size	1/1 \
Filter size	58 mm
Optical zoom	15 x
Image stabilizer	Yes
Image stabilizer type	Optical Image Stabilization (OIS)
Maximum aperture number	2.8
Focal length (35mm film equivalent)	25.5 - 382.5 mm
3D	No
Camcorder type	Handheld camcorder
Image processor	DIGIC DV 7
Remotely operated	-
Minimum illumination	1.5 lx
Focus adjustment	Auto/Manual
Memory slots	2
Camcorder media type	Memory card
Compatible memory cards	SD, SDHC, SDXC
Maximum memory card size	- GB
Product color	Black
Video resolutions	1280 x 720, 1920 x 1080, 3840 x 2160 pixels
Maximum frame rate	120 fps
Video formats supported	H.265, MP4, MPEG4, MXF
Maximum video resolution	3840 x 2160 pixels
Analog signal format system	NTSC, PAL
Image formats supported	JPEG
Headphone outputs	1
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	0
Display diagonal	3.5 \
Viewfinder type	Optical
PCM digital audio	16-bit/48 kHz
Camera shutter speed	1/2000 s
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Storage temperature (T-T)	-5 - 45 °C
Operating temperature (T-T)	0 - 40 °C
ISO sensitivity	200, 12800, Auto
Battery capacity	- mAh
Battery life (max)	2.5 h
Video recording time	- h
Number of diaphragm blades	9

Weight and Dimensions

Depth	173 mm
Width	168 mm
Height	333 mm
Weight	2010 g