Using the Menus
26
• You can also touch the desired page or menu item.
• Going forward, this operation will be referred to as “press SET” in this manual.
4 Select the desired menu item ([Language
H
], in the example) and then press SET.
• Push the joystick left/right to scroll through the menu pages. Moving left/right from the first/last page will
move to the previous/next setup.
• Push the joystick up/down to move the cursor over the menu items on the page.
• You can also drag the screen left/right to navigate pages, or drag the screen up/down to move the orange
selection frame. You can also select a menu item by lifting your finger when you get to the desired item.
5Push the joystick up/down to select the desired setting option and then press SET.
• During the selection, the currently selected option is indicated with a mark. Press SET to confirm your
selection and go back to the previous screen.
• When many options are available, a scroll bar will appear on the right. Scroll up or down to see other
options.
• You can also touch the desired option.
• Press the CANCEL button or select [L] and press SET to return to the previous menu level.
6Press the MENU button to close the menu.
• Pressing the MENU button at any time closes the menu.
• Unavailable items may appear grayed out.
• On some screens, the following icons may be displayed as a guide: , , . They refer, respectively,
to pressing the joystick, the MENU button (or touching the onscreen guide) and the CANCEL button.
• When an RC-V100 Remote Controller is connected to the camera, you can use the remote controller’s up/
down/left/right/SET buttons in the same way as the camera’s joystick. Pressing the SET button is equivalent to
pressing the joystick itself to confirm a selection.
• You can check most of the current settings on the status screens (A 197).
Using the Customized Menus (My Menu)
In CAMERA mode, you can register up to 6 frequently used menu settings under a My Menu page for easy
access. You can save up to 5 separate sets of My Menu settings each with 6 options for different shooting
situations. Furthermore, if you set an assignable button to [My Menu] (A 115), you can press the button to
access your registered menu settings even faster and more easily.
Adding Menu Settings
1 Select > [¥ My Menu] > Desired menu page > [Edit] > [Register].
• A screen will appear where you can select the menu setting you want to add.
• Press the CANCEL button to cancel the operation and return to the regular menu.
2 Select the menu setting you want to add.
3 Select [OK].
• The menu setting you registered will now appear under the currently selected My Menu set.
Rearranging Menu Settings
1 Select > [¥ My Menu] > Desired menu page > [Edit] > [Move].
2 Select the menu setting you want to move.
•The
]
icon will appear next to the setting you selected to move.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
