111
Using the RC-V100 Remote Controller
Using the RC-V100 Remote Controller
You can connect the RC-V100 Remote Controller to the camera in order to control the camera (including
advanced recording functions) from a distance. The remote controller lets you turn the camera on, navigate the
menus and remotely control the aperture and shutter speed, change picture-related settings like the knee and
sharpness, and more.
For details on how to connect and use the remote controller, refer to its instruction manual.
1 Turn off the camera and connect the RC-V100 Remote Controller to the camera.
2 Turn on the camera in CAMERA mode.
3 Select > [
B
System Setup] > [REMOTE Term.] > [RC-V100 (REMOTE A)] or [RC-V100
(REMOTE B)].
Options
[RC-V100 (REMOTE A)]:
Select this option to use the optional RC-V100 connected to the camera with the RC-V100’s
remote cable.
[RC-V100 (REMOTE B)]:
Select this option to use the RC-V100 connected to an expansion unit with an 8-pin remote
cable (all optionals).
[Standard]: Select this option to use commercially available remote controls.
[Standard + RC-V100]:
Select this option to use a commercially available remote control (connected to the REMOTE A
terminal) simultaneously with an optional RC-V100 (connected to the REMOTE B terminal). Note
that with this connection, you will not be able to turn the camera on/off using the CAMERA
POWER button on the RC-V100.
• When the camera is set to full auto mode (A 42), settings related to the aperture, gain, shutter speed and
white balance (except for [R Gain] and [B Gain] in the custom picture's [White Balance] settings*) cannot be
changed using the remote controller.
* When infrared recording is activated, even the WHITE BALANCE R and B dials will have no effect on the camera.
RR-10 or RR-100 8-pin
Remote Cable (optional)
Remote cable
(supplied with the RC-V100)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
