Focus
76
Push AF/MF
When the focus mode is set to manual, the camera will focus automatically as long as you hold the PUSH AF/MF
button pressed down. During autofocus, holding the PUSH AF/MF button pressed down will allow you to adjust
the focus manually.
Press and hold the PUSH AF/MF button.
• The focus will be locked when Face AF is set to [Face Only]
and a face has not been detected, or when [AF Mode] is
set to [AF-Boosted MF] and the focus is outside of the
automatic adjustment range.
AF-Boosted MF
In this focus mode, you can focus manually most of the way and let the camera finish focusing automatically.
This is very convenient when you want to make certain that high-resolution clips (4K and higher) are in sharp
focus.
Additionally, with this mode, if the camera cannot evaluate how to adjust the focus, it will not perform unreliable
focus adjustments. This results in a more stable focusing operation overall than with continuous AF.
1 Set the focus mode switch to automatic.
•
@
appears on the screen.
2 Select > [
v
Camera Setup] > [AF Mode] >
[AF-Boosted MF].
• When the focus is in the manual adjustment range, a
yellow AF frame will appear on the screen.
3 If necessary, change the type and position of the AF
frame (A 78).
4 Turn the focus ring to adjust the focus.
• Focus manually to bring the subject closer into focus.
When the focus enters the automatic adjustment range,
the focus frame will turn white and the camera will then
finish focusing automatically.
• While the focus stays within the automatic adjustment range, the camera will keep the subject in focus
automatically.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
