EasyManuals Logo

Canon XF605 User Manual

Canon XF605
238 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
Focus
80
Tracking a Specific Subject
You can have the camera track other moving subjects that are not faces and also combine the tracking function
with one of the autofocus functions to let the camera focus on the desired subject automatically.
When [AF Mode] is set to [Continuous] and [AF Frame] is set to [Whole Area]
Touch the desired subject on the LCD screen.
A double frame
£
(tracking frame) is displayed and the camera will start tracking the selected subject.
Press the CANCEL button to remove the frame and cancel the tracking.
If tracking fails, will be displayed. Select the desired subject again.
When [AF Frame] is set to [Whole Area], [Large] or [Small]
1 Set an assignable button to [Tracking] (A 115).
2 Press the assignable button.
The subject selection mark
I
will appear on the screen.
Press the assignable button again or the CANCEL button to end the subject selection mode.
3 Touch the desired subject on the LCD screen.
•The
I
mark changes to a double frame
£
(tracking frame) and the camera will start tracking the selected
subject.
You can also use the joystick (4 directions) to place the center of the
I
mark on the desired subject and
then press SET.
If the tracking failed, the
I
mark will turn red momentarily. Select the subject again.
The subject selected for tracking becomes the target for autofocus functions.
4 Press SET or the button assigned to [Tracking].
The camera stops tracking and returns to subject selection mode.
Press the CANCEL button to end the tracking function and return the camera to the focus mode that was
used previously.
NOTES
NOTES
The camera may start tracking the incorrect subject if there is another subject in the picture with similar color/
pattern characteristics. In that case, select the desired subject again.
Tracking cannot be used in the same cases in which face detection AF and eye detection cannot be used
(A 79).
Focus Limit and Macro Shooting
By default, the camera’s focus range allows macro shooting. You can activate the focus limit to restrict the focus
range. The focus range (1 cm (0.39 in.; at full wide-angle) to ) will be limited to 60 cm (2 ft.) to (throughout
the entire zoom range).
Select > [
v
Camera Setup] > [Focus Limit] > [On].

Table of Contents

Other manuals for Canon XF605

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon XF605 and is the answer not in the manual?

Canon XF605 Specifications

General IconGeneral
Sensor typeCMOS
Total megapixels13.4 MP
Optical sensor size1/1 \
Filter size58 mm
Optical zoom15 x
Image stabilizerYes
Image stabilizer typeOptical Image Stabilization (OIS)
Maximum aperture number2.8
Focal length (35mm film equivalent)25.5 - 382.5 mm
3DNo
Camcorder typeHandheld camcorder
Image processorDIGIC DV 7
Remotely operated-
Minimum illumination1.5 lx
Focus adjustmentAuto/Manual
Memory slots2
Camcorder media typeMemory card
Compatible memory cardsSD, SDHC, SDXC
Maximum memory card size- GB
Product colorBlack
Video resolutions1280 x 720, 1920 x 1080, 3840 x 2160 pixels
Maximum frame rate120 fps
Video formats supportedH.265, MP4, MPEG4, MXF
Maximum video resolution3840 x 2160 pixels
Analog signal format systemNTSC, PAL
Image formats supportedJPEG
Headphone outputs1
Headphone connectivity3.5 mm
USB 2.0 ports quantity0
Display diagonal3.5 \
Viewfinder typeOptical
PCM digital audio16-bit/48 kHz
Camera shutter speed1/2000 s
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Storage temperature (T-T)-5 - 45 °C
Operating temperature (T-T)0 - 40 °C
ISO sensitivity200, 12800, Auto
Battery capacity- mAh
Battery life (max)2.5 h
Video recording time- h
Number of diaphragm blades9
Weight and Dimensions IconWeight and Dimensions
Depth173 mm
Width168 mm
Height333 mm
Weight2010 g

Related product manuals