EasyManuals Logo

Canon XF605 User Manual

Canon XF605
238 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
67
White Balance
NOTES
NOTES
You can use the > [
v
Camera Setup] > [C. Temp. Increment] setting to change the units for the color
temperature increment to [Mired] (5-mired increments) or [Kelvin] (100-kelvin increments). Even when [Mired] is
selected, the color temperature is converted to and displayed in kelvins. Changing this setting may change the
white balance setting.
If you set an assignable button to [¼ Daylight], [É Tungsten] or [
È
Kelvin] (A 115), you can press the
button to change the white balance mode temporarily. Press the button again to return to the previous white
balance mode.
Custom White Balance
1 Set the AWB switch to OFF and the
WHITE BAL. switch to either A or B.
To apply the stored custom white balance
setting as is, the rest of the procedure is
not necessary. To set a new custom white
balance, continue the procedure.
2 Point the camera at a gray card or white
object so that it fills the center of screen.
Use the same lighting conditions you plan
to use when recording.
3Press the
Å
button.
•The
Å
A or
Å
B icon will flash quickly.
Make sure the gray card or white object
fills the center of the screen until the
procedure is completed.
Once the icon stops flashing, the
procedure is completed. The setting is
retained even if you turn off the camera.
NOTES
NOTES
Readjust the custom white balance if the light source or ND filter setting changes.
Very rarely and depending on the light source,
Å
may keep flashing (it will change to a slow flashing). In that
case, change the subject brightness and adjust the custom white balance again.
After the camera registers a custom white balance, the color temperature or CC value may appear in gray. This
indicates that the value registered exceeds the range of values that can be displayed but the white balance is
correctly calibrated and you can continue shooting.
White balance mode/setting
Adjustment range
Color temperature (K) Color compensation (CC) value
¼
(daylight) 4,300 K to 8,000 K
–5 to +5
É
(tungsten lamp) 2,700 K to 3,700 K
È
(color temperature) 2,000 K to 15,000 K –20 to +20

Table of Contents

Other manuals for Canon XF605

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon XF605 and is the answer not in the manual?

Canon XF605 Specifications

General IconGeneral
Sensor typeCMOS
Total megapixels13.4 MP
Optical sensor size1/1 \
Filter size58 mm
Optical zoom15 x
Image stabilizerYes
Image stabilizer typeOptical Image Stabilization (OIS)
Maximum aperture number2.8
Focal length (35mm film equivalent)25.5 - 382.5 mm
3DNo
Camcorder typeHandheld camcorder
Image processorDIGIC DV 7
Remotely operated-
Minimum illumination1.5 lx
Focus adjustmentAuto/Manual
Memory slots2
Camcorder media typeMemory card
Compatible memory cardsSD, SDHC, SDXC
Maximum memory card size- GB
Product colorBlack
Video resolutions1280 x 720, 1920 x 1080, 3840 x 2160 pixels
Maximum frame rate120 fps
Video formats supportedH.265, MP4, MPEG4, MXF
Maximum video resolution3840 x 2160 pixels
Analog signal format systemNTSC, PAL
Image formats supportedJPEG
Headphone outputs1
Headphone connectivity3.5 mm
USB 2.0 ports quantity0
Display diagonal3.5 \
Viewfinder typeOptical
PCM digital audio16-bit/48 kHz
Camera shutter speed1/2000 s
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Storage temperature (T-T)-5 - 45 °C
Operating temperature (T-T)0 - 40 °C
ISO sensitivity200, 12800, Auto
Battery capacity- mAh
Battery life (max)2.5 h
Video recording time- h
Number of diaphragm blades9
Weight and Dimensions IconWeight and Dimensions
Depth173 mm
Width168 mm
Height333 mm
Weight2010 g

Related product manuals