97
Recording Audio
Changing the Reference Level of the External Microphone (INPUT Terminals)
You can select the reference level of each INPUT terminal (-18 dB or -20 dB).
Select > [
¡
Audio Setup] > [INPUT Reference Level] > Desired option.
Built-in Microphone Sensitivity
You can adjust the sensitivity according as necessary.
Select > [
¡
Audio Setup] > [Built-in Mic Sensitivity] > Desired option.
Options
[Normal]: For recording audio under usual conditions.
[High]: For recording audio at a higher volume (+6 dB).
Microphone Attenuator (MIC Terminal/Built-in Microphone)
You can activate the microphone attenuator for an external microphone or the built-in microphone (20 dB).
Select > [
¡
Audio Setup] > [MIC Att.] or [Built-in Mic Att.] > [On].
Microphone Characteristics (MIC Terminal/Built-In Microphone)
You can choose the microphone characteristics as necessary.
Select > [
¡
Audio Setup] > [MIC Low Cut] or [Built-in Mic Low Cut] > Desired option.
Options
[Off]: For recording audio under usual conditions.
[LC1]: For recording mainly people’s voices.
[LC2]: For reducing the background sound of wind when recording outdoors in windy surroundings (for
example, on a beach or close to buildings). Note that when you use this setting some
low-frequency sounds may be suppressed along with the sound of wind.
Monitoring the Audio with Headphones
Connect headphones with a 3.5 mm stereo mini-plug to
the
×
(headphone) terminal to monitor the recorded audio.
• You can adjust the headphone volume with the >
[
¡
Audio Setup] > [Headphone Volume] setting. If you
set an assignable button to [Headphones +] or
[Headphones –] (A 115), you can press the button to
adjust the headphone volume without using the menu.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
