6 . SPECIFICATIONS
6.9
Challenger MT500B EU
6
6.13 - STEERING
Type: Hydrostatic, fixed or tiltable telescopic steering column, one double acting central ram.
* with front axle disengaged
6.14 - WHEELS
6.15 - TYRES
Compatibility of front/rear tyres on 4-wheel drive tractors (same make and model).
NOTE: The data in this table is not all inclusive. Ask your dealer for further information on other possible choices.
6.16 - INFLATION PRESSURE
See chapter 5.
6.17 - TRACK WIDTH ADJUSTMENTS
See chapter 5.
6.18 - NOISE LEVELS (dBA) AT OPERATOR EARS
Measured according to: directive 77/311 CEE Annex II (A).
Specified
turning radius
MT525B-MT535B-MT545B-
MT555B-MT565B/MT575B
Front tyre dimensions 14.9R28 16.9R28
Track adjustments
Inner angle
2.05
55°
2.17
55°
Outer tyre radius *
Without braking (m)
4.97
FRONT 4-wheel drive pressed steel
REAR Manual adjustment steel
Cast iron with automatic or manual adjustment
Front Rear Front Rear
13.6R38
16.9R34
350-85R38
400-75R38
13.6R24
340-85R24
400-70R24
380-70R24
16.9R38
18.4R38
460-85R38
520-70R38
14.9R28
380-85R28
420-75R28
18.4R42
20.8R38
14.9R46
520-85R38
620-70R38
16.9R28
14.9R30
420-85R28
480-70R28
380-85R30
420-70R30
20.8R42
18.4R46
520-85R42
580-70R42
16.9R30
14.9R34
420-85R30
480-75R30
Type
CEE 77/311 - Annex II
Windows closed Windows open
MT525B 71 77
MT535B 71 77
MT545B 70 75
MT555B 71 79
MT565B 71 79
To Next Page
Loading...
Need help?
General
