7 . ACCESSORIES AND OPTIONS
7.7
Challenger MT500B EU
7
7.2.3 - Symbols
ENGINE SPEED: Instant engine speed in
rpm.
PTO 540/1000 RPM: PTO speed in rpm.
FORWARD SPEED: This is the actual for-
ward speed of the tractor in relation to the
ground in kph.
WHEEL SLIP: This is the actual rate of
wheel slip as a percentage.
WHEEL SLIP LIMIT:
Maximum % slip value
accepted by operator or maximum limit. Over
this limit, the wheel slip control comes into ac-
tion. This percentage varies unit by unit.
AREA/HOUR: Instant area worked per
hour (hectares, acres).
FUEL/HOUR: Instant consumption per
hour (litre, gallon).
FUEL/AREA: Instant consumption per
worked unit of area.
FUEL USED:Total fuel used (litre, US/Im-
perial gallon).
AREA WORKED: This is the total area in
acres or hectare worked but only when the
implement is working.
HOURS WORKED: The time accumulated
with engine running (in tenths of hour)..
COUNTER: Can be used to count and
memorise a number of work units for the
hitched implement (e.g. round baller).
COST/AREA: Instant cost per area unit
worked (in local currency).
SERVICE: Displays the number of hours
before the next servicing.
DISTANCE: Total distance covered (in me-
tres, miles)..
TIME: Clock (see additional functions section).
DATE: Current date (see additional functions section).
COST/L: Information about the local fuel cost (must be
stored).
COST/AREA: Information about the hourly cost of work
(must be stored).
UNITS: Must be selected by user (Metric, US, UK).
n/min
To Next Page
Loading...
Need help?
General
