5 . MAINTENANCE AND ADJUSTMENTS
5.9
Challenger MT500B EU
5
5.4 - LUBRICATION
AGCO recommends the following lubricants:
5.4.1 - All year round
NOTE: The warranty remains valid only as long as the lubricants used comply with the following classifications,
and no other products are used.
Engine: API CH4 / CCMC D4 or D5.
Transmission: refer to MF specifications CMS M1143 or CMS M1144.
Front axle: API GL5.
5.5 - INSTRUCTIONS FOR PRESSURE WASHING
When pressure washing, protect and do not direct the jet on the following components:
•Alternator
• Starter motor
•Cooler
• 4WD axle stub pivot pins
• Inspection cover
•Radar
• Electrical harnesses and connections
• Safety decals
• Engine Terrac Motor 15W-40.
• Cooling system Napgel C2230 in conformity with BS 6580-1992 (Europe/UK).
• Transmission
*
and auxiliary hydraulics
Terrac Extra or Terrac Tractran 9/Fluid 9.
• Front axle, front final drive units Terrac Trans - 85 W/140.
• Clutch control Pentosin CHF 11S liquid
• General greasing Terrac Charge
* It is essential to use BP Terrac extra oil or another oil product approved by MF according to CMS M1143 or CMS M1144
standard.
These products are manufactured and distributed by:
BP France
bâtiment Newton 1 - Parc St Christophe
10 rue de l' Entreprise - CERGY
95866 CERGY PONTOISE CEDEX
Technical information: 0800 476 840 (freephone).
To Next Page
Loading...
Need help?
General
