Cisco Catalyst 6500 Series User Manual

5-26
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide
OL-6392-01
Chapter 5 Managing Security Contexts
Monitoring Security Contexts
Viewing Resource Allocation
From the system execution space, you can view the allocation for each resource across all classes and
class members.
From the system execution space, view the resource allocation by entering the following command:
FWSM# show resource allocation [detail]
This command shows the resource allocation, but does not show the actual resources being used. See the
“Viewing Resource Usage” section on page 5-28 for more information about actual resource usage.
The detail argument shows additional information. See the sample displays below for more information.
The following sample display shows the total allocation of each resource as an absolute value and as a
percentage of the available system resources:
FWSM# show resource allocation
Resource Total % of Avail
Conns [rate] 35000 35.00%
Fixups [rate] 35000 35.00%
Syslogs [rate] 10500 35.00%
Conns 305000 30.50%
Hosts 78842 30.07%
IPsec 7 35.00%
SSH 35 35.00%
Telnet 35 35.00%
Xlates 91749 34.99%
All unlimited
Table 5-3 shows each field description.
Table 5-3 show resource allocation Fields
Field Description
Resource The name of the resource that you can limit.
See the “Configuring a Class” section on page 5-14 for more information about
each resource name.
Total The total amount of the resource that is allocated across all contexts. The amount
is an absolute number of concurrent instances or instances per second. If you
specified a percentage in the class definition, the FWSM converts the percentage to
an absolute number for this display.
% of Avail The percentage of the total system resources that is allocated across all contexts.

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English