NVIDIA Video Driver Controls
Configure Other Displays Using Project C - 3
C
Configure Other Displays Using Project
You can configure attached displays from Project.
1. Attach your display to the appropriate port, and turn it on.
2. Press the + P key combination.
3. Click on any one of the options from the menu to select PC screen only,
Duplicate, Extend or Second screen only.
4. You can also click Connect to a wireless display at the bottom of the Project
screen and follow the steps to connect to any wireless enabled display.
NVIDIA Control Panel
If you have connected 2 or 3
external displays configured
in Clone mode, you must use
the NVIDIA control panel to
configure the displays.
In this case do not use the
Windows Key + P key (Proj-
ect) combination as this does
not affect the changes made
by the NVIDIA control panel.
To Next Page
Loading...
Need help?
General
