Deif XDi Series User Manual

DESIGNER’S HANDBOOK 4189350049C EN Page 92 of 206
8.3 Quick menu (only XDi-N)
The quick menu opens for the basic user setup functions:
• Unit profile toggle,
• Unit profile setup
• VI mode group setup
• Data and time setup
• User menu (gives access to dimmer, warning and sound setup)
8.3.1 Change unit profile
The XDi-N supports different selectable data units. The default presentation units are predefined in the three unit
profiles. In the standard wind indicators, it is the wind speed unit that is selectable via the unit profiles. Each unit
profile contains default setup for all selectable data units that the XDi-N supports.
Be aware that the unit shift function will only work if the selected virtual indicator is designed to support this function
for the given data type.
The default setup for the wind indicator is:
Profile 1: Wind speed in m/s
Profile 2: Wind speed in knots
Profile 3: Wind speed in Beaufort
The default profile when the XDi-N wind indicator is installed is unit profile 1. This means that wind speed is
presented in m/s.
To shift to knots, you must select unit profile 2. To do that press the right button shortly once to have the soft key
menu presented, and push the right button again to open the quick menu.

Deif XDi Series Specifications

General

Brand	Deif
Model	XDi Series
Category	Measuring Instruments
Language	English