Dell D02T User Manual

Table 5. System Configuration(continued)
Option Description
• RearPort3 Top *
• RearPort1 Top *
• RearPort2 Top *
• RearPort3 Bottom *
• RearPort1 Bottom *
• RearPort2 Bottom *
All the options are set by default.
Internal USB Configuration
Allows you to enable/disable Internal USB ports.
• Internal Port 2
This option is set by default.
Dell Type-C Dock Configuration
Allows you to connect to Dell WD and TB family of docks.
Always Allows Dell Docks
This option is set by default.
Thunderbolt Adapter Configuration
Allows you to enable or disable the Thunderbolt device support
capability.
The options are:
• Enabled Thunderbolt Technology Support
• Enabled Thunderbolt Adapter Pre-boot Modules
• Enabled Thunderbolt Adapter Boot Support—Default
NOTE: The security level configures the Thunderbolt
adapter security settings within the operating system.
USB PowerShare
Allows you to configure the USB PowerShare feature behavior.
• Enable USB PowerShare
This option is not set by default.
Audio
Allows you to enable or disable the integrated audio controller.
• Enable Audio
This option is set by default.
Memory Map IO above 4GB
Allows you to enable or disable 64-bit capable PCI devices to be
decoded in above 4 GB address space(only if the system supports
64-bit PCI decoding).
• Memory Map IO above 4GB
This option is not set by default.
HDD Fans
Allows you to control the HDD fans.
The options are:
• HDD1 Fan Enable
• HDD2 Fan Enable
• HDD3 Fan Enable
All the options are not set by default.
Miscellaneous devices
Allows you to enable or disable various on board devices.
The options are:
System Setup 105

Dell D02T Specifications

General

Brand	Dell
Model	D02T
Category	Desktop
Language	English