Installing the system board
1. Align and place the system board into the chassis.
2. Slide the system board to its position.
3. Replace the screws to secure the system board to the chassis.
4. Place the system fan fixed bracket and replace the single screw on the system board.
5. Connect the following cables:
• audio cable
• power cable
• power control cable
• 24Pin power cable
• front I/O panel
• SATA cables
• ODD cables
• USB 3.1 cables
• Front system fan cable
6. Install the:
a. PCIe holder
b. memory module
c. system fan
d. rear system fan
e. PHM
f. air shroud
g. GPU
h. side cover
7. Follow the procedure in After working inside your computer.
88
Removing and installing components
To Next Page
Loading...
Need help?
General
