To Next Page

To Previous Page

Table 1. Screw list (continued)

Component Screw type Quantity

HDD Bracket M3X5.0mm 1

5.25" ODD Bracket

#6-32 UNC X6.0mm

M3X5.0mm

System Board #6-32X1/4 inches 11

Middle Fan Fixed Bracket #6-32X1/4 inches 1

Middle Fan Bracket #6-32X1/4 inches 3

Rear Fan Bracket #6-32X1/4 inches 2

HSBP Board M3X5.0mm 2

Slim ODD Fixed Bracket M2X2.0mm 2

Slim ODD M3X5.0mm 1

5.25" ODD M3X4.5mm 4

3.5" HDD Bracket M3X4.5mm 4

2.5" HDD Bracket M3X4.5mm 4

2nd CPU Support Bracket #6-32X1/4 inches 2

2nd CPU Board #6-32X1/4 inches 5

UPI Fixed Bracket M3X5.0mm 1

CPU Cooler T-30 torx bolt 4

Liquid Cooler Module

#6-32X1/4 inches

#6-32 UNC X3.5mm

T-30 torx bolt

Recommended tools

The procedures in this document require the following tools:

• Phillips #0 screwdriver

• Phillips #1 screwdriver

• Philips #2 screwdriver

• Plastic scribe

• T-30 torx screwdriver

NOTE: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4.

Power supply unit (PSU)

Removing the PSU

1. Follow the procedure in Before working inside your computer.

2. Disconnect the power cable from the system.

3. Press the PSU release latch [1] and slide the power supply away from the system [2].

Removing and installing components

Dell D02T User Manual

Other manuals for Dell D02T