Table 7. Security(continued)
Option Description
Computrace (R)
Allows you to activate or disable the optional Computrace software.
The options are:
• Deactivate—Default
• Disable
• Activate
Chassis Intrusion
Allows you to control the chassis intrusion feature.
Click one of the following options:
• Disabled—Default
• Enabled
• On-Silent
CPU XD Support
Allows you to enable the Execute Disable mode of the processor.
• Enable CPU XD Support
This option is set by default.
OROM Keyboard Access
Allows you to determine whether users are able to enter the Option ROM Configuration screens via
hotkeys during boot. The options are:
Click one of the following options:
• Enabled—Default
• One Time Enable
• Disabled
Admin Setup Lockout
Allows you to prevent users from entering Setup when an administrator password is set.
• Enable Admin Setup Lockout
This option is not set by default.
Master Password Lockout
Allows you to disable master password support.
• Enable Master Password Lockout
This option is not set by default.
NOTE: Hard Disk password should be cleared before the settings can be changed.
Secure boot
Table 8. Secure Boot
Option Description
Secure Boot Enable
Allows you to enable or disable the Secure Boot Feature.
Click one of the following options:
• Disabled—Default
• Enabled
Expert Key Management
Allows you to enable or disable Expert Key Management.
• Enable Custom Mode
This option is not set by default.
The Custom Mode Key Management options are:
108 System Setup