4–Switch Independent Partitioning
Switch Independent Partitioning Setup and Management Options
159 CU0354602-00 L
Figure 4-24 shows the CLI commands leading to the option for changing a
function type on a Linux system.
Figure 4-24. Selecting Function Type on Linux System
8. Return to the main menu and select 8: NIC Partitioning <NPAR>
Statistics to view the statistics.
Navigate through the menu selections to view eSwitch statistics.
9. After you have finished setting the NIC partitions as needed, you must
reboot the host server for the changes to take effect.
Windows Device Manager
On a Windows server that hosts QLogic adapters, you can use the Windows Device
Manager to set up NIC partitions. You can also use it to view eSwitch statistics.
To set up Switch Independent Partitioning using the Windows Device
Manager:
1. Configure Switch Independent Partitioning
2. Change Personalities
3. Manage Bandwidth
4. View eSwitch Statistics
To Next Page
Loading...
Need help?
General
