Dell QMD8262-k User Manual

5–Boot Configuration
iSCSI Configuration Using Fast!UTIL
207 CU0354602-00 L
Configuring Parameters for a Secondary Adapter
If login to the primary boot target fails, the BIOS should attempt to log in to the
secondary target using the same technique. BIOS attempts to log in to boot
targets configured on different ports, depending on their configuration. iSCSI ports
can reside on physical interfaces and may exist on separate adapters.
When any combination of these adapters (QMD8262-k, QLE8262, or
QME8262-k) are present in a system, Fast!UTIL lists all of the iSCSI interface
ports. Select a specific port of a secondary adapter to configure its parameters.
Configuring QLogic iSCSI Boot
To configure QLogic iSCSI boot:
1. During POST, press CTRL+Q to enter the QLogic iSCSI BIOS Fast!UTIL
utility.
Figure 5-21 shows the main Options menu.
Figure 5-21. Fast!UTIL: Options Menu

Dell QMD8262-k Specifications

General

Brand	Dell
Model	QMD8262-k
Category	Network Card
Language	English