Dell QMD8262-k User Manual

3–Adapter Management Applications
Windows Management Applications
73 CU0354602-00 L
Windows Management Applications
Windows management applications for the adapter include the following:
 Windows NIC Driver Management Applications
 Windows Teaming
 Windows VLAN Configuration
 User Diagnostics for Windows NIC Driver Management Applications
Windows NIC Driver Management Applications
 Overview
 Viewing and Changing Adapter Properties
Overview
In the QConvergeConsole CLI (qaucli) utility, you can view VLAN and teaming
overview information by issuing the qaucli –nt –zvt command. (The qaucli is
an installation option available when you install the Windows drivers; see
“Windows Driver Installation and Configuration” on page 5.)
Viewing and Changing Adapter Properties
This section provides information on using the QConvergeConsole CLI:
 Viewing Adapter Properties
 Changing Adapter Properties
Viewing Adapter Properties
Issue the following commands to view the adapter properties.
To list all detected adapter ports:
qaucli -nic -i [cna_port_inst]
To view adapter information:
qaucli -nic -icna [cna_port_inst]
To view port DCBX protocol information:
qaucli -nic -idcbx [cna_port_inst]
To view configured port settings:
qaucli -nic -iset [cna_port_inst]
To view physical link status:
qaucli -nic -link [cna_port_inst]

Dell QMD8262-k Specifications

General

Brand	Dell
Model	QMD8262-k
Category	Network Card
Language	English