Delta DVP-ES3 Series User Manual

Chapter 7 Memory Card
7-13
7_
7.7 Restoring a Project
If the restoration source or restoration destination is a DVP-ES3 Series CPU module or memory card, make
sure that ISPSoft is connected to the DVP-ES3 Series CPU module. During restoration, the CPU LED and
Error LED blinks alternatively and SM452 flag is ON. After restoration is done, the CPU LED and Error LED
stops blinking and SM452 flag is OFF. Refer to Section 2.4 in the ISPSoft User Manual for more information.
(1)
Select Restore (From DUP File) in the CARD Utility wizard and then click Next.
(2)
Select a restoration source, click and then select a backup file to be restored.
a. If you select Memory Card (PLC side) (Need Connection), the backup files in the memory card
display in a window after you click
. Double-click a backup file in the window to choose it.

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English