Configure the AnywhereUSB Plus Hub from the CLI infoicmp
AnywhereUSB® Plus User Guide
130
infoicmp
Purpose
Displays statistics related to Internet Control Message Protocol (ICMP) activity.
Statistics that display are gathered since the statistic tables were last cleared by rebooting the Hub,
and include data, event, and error counts. These statistics are useful in understanding how the Hub is
operating and can be helpful in finding problems. In particular, if an error counter is found to be
increasing there may be a problem with the Hub.
To reset the statistics, reboot the device.
Syntax
info icmp
Example
#> info icmp
ICMP Statistics:
Datagrams Received : 0 Datagrams Sent : 0
Receive Errors : 0 Send Errors : 0
Unreachable Received : 0 Unreachable Sent : 0
To Next Page
Loading...
Need help?
General
