Manage the Hubs using the AnywhereUSB Manager
You can use the AnywhereUSB Manager to view the AnywhereUSB Plus Hubs that are allowed to
connect to your computer. You can also connect to groups of USBports on the Hubs.
By default, the AnywhereUSBManager is configured to automatically discover Hubs that are
connected to the same network as your computer. You can allow a connection to additional Hubs that
are not on the same network.
Note Before you begin, make sure you have installed the AnywhereUSB Manager.
Start the AnywhereUSB Manager 33
Rename AnywhereUSB® Plus Hubs, groups, and USBdevices 33
Disconnect from a group or USB device 34
Configure auto connect 35
Manage the list of known Hubs 36
Hide an individual Hub 38
Hide all unauthorized Hubs 39
Minimize the AnywhereUSB Manager when launched 40
Autofind Hubs when the AnywhereUSBManager launches 40
Specify search, response, and keepalive intervals for a Hub 41
Manage Hub credentials 42
View latency graph 44
View the AnywhereUSB Manager system messages 44
View AnywhereUSB® Plus license information 44
Restore AnywhereUSBManager default configuration 45
Access the online help from the AnywhereUSBManager 46
AnywhereUSB Manager window 46
Exit the AnywhereUSB Manager 53
AnywhereUSB® Plus User Guide
32
To Next Page
Loading...
Need help?
General
