Administrators: Configure the AnywhereUSB® Plus in the web user interface View current connections to the Hub
AnywhereUSB® Plus User Guide
65
View current connections to the Hub
You can view information about current connections to the Hub in the Connections Management
page.
1. Open the web UI.
2. Click Connections in the Management section. The Connections Management page appears.
n Local Address: The IP address of the Hub and the TCP port number of a network
service running on the Hub. The TCP Port information is available on the Network
Service Configuration page.
n Remote Address: The IPaddress of the computer connected to the Hub.
n Service: A description of the service connected to the Hub.
3. Click Refresh to update the information in the screen.
Configure network services
You can configure network services options in the Network Service Configuration page. All network
services options are selected by default.
For each service you must specify the TCP port number. The ports are configured by default, and
changing the default value is not recommended.
1. Open the web UI.
2. Click Network Services in the Configuration section. The Network Service Configuration
page appears.
To Next Page
Loading...
Need help?
General
