Administrators: Configure the AnywhereUSB® Plus in
the web user interface
You can configure the AnywhereUSB® Plus Hub in the Configuration and Management web user
interface.
The web UIis available from a Hub listed in the AnywhereUSB Manager. You must install the
AnywhereUSBManager before you can use the web UI. See Install the AnywhereUSB Manager.
Open the Configuration and Management web user interface 55
Configuration and Management web user interface 55
Configure and manage client IDs 56
Automatically register or reject unknown clients 60
Rename a Hub and the groups in a Hub 61
View Hub system information 62
Configure the IP address on the Hub 63
Ethernet network bonding 64
Change the Hub password 64
View current connections to the Hub 65
Configure network services 65
Configure the findme feature 66
Configure device identity settings 67
Allow the Hub to connect to Remote Manager 67
Backup and restore settings 68
Update the firmware 69
View system logs 70
View system statistics 70
Configure the time on the Hub 71
Restore factory default settings from the web UI 72
Reboot the Hub 73
Uninstall the AnywhereUSBManager 73
AnywhereUSB® Plus User Guide
54
To Next Page
Loading...
Need help?
General
