Get started Verify initial connection
AnywhereUSB® Plus User Guide
24
8. Before you can register the client ID with the Hub, you must add the client ID to the Hub from
the web UI.
a. Right-click on the Hub and select Open Web UI.
b. A login dialog displays. Enter the following:
n User name: admin
n Password: Located on the label on the bottom of the Hub. Note that the
password is case-sensitive and must be typed in exactly as it appears on the
label.
Note The first time you launch the web UI, a warning dialog may appear if your
internet connection is not private. In this situation, continue to access the device.
The log in dialog appears.
c. Click Login. The web UI appears.
d. Click AnywhereUSB from the Configuration section. The AnywhereUSB
Configuration page appears.
e. In the Client Settings section, click Add Client. A new row labeled "New Client" is
added to the client list and the Settings for Client section is populated for the new
client.
f. In the Client ID field, enter the client ID you assigned to your computer when you
installed the AnywhereUSBManager.
g. In the Description field, enter a descriptive name for the computer. This step is
optional.
h. Click the check box next to group 1.
i. Click Apply to save the Hub settings.
9. Open the AnywhereUSBManager. The Manager connects to the Hub.
10. Expand the Hub to display the groups.
11. Expand Group 1 to display the USB flash drive connected to Group 1.
To Next Page
Loading...
Need help?
General
