3 - 16 Operating Instructions
DigiGate-700
for Windows
™ ®
10. Click on the
Transfer
button, Figure 3-30, if
you want to move the tenant from one unit to
another.
NOTE: The tenant is moved out of the old or
Source unit and moved into the new or Target
unit.
8. The
Confirm
window, Figure 3-29, will open if
Verify Prompts
is set to
Yes
in the
User IDs
setup.
9. Click
Yes
to link the selected unit, or
No
to
return to the
Select units to transfer/copy
to
screen.
NOTE: You may repeat this process to link as
many units as necessary.
Figure 3-29
Figure 3-30
To Next Page
Loading...
Need help?
General
