EasyManuals Logo
Home>EDAN>Monitor>iM50

EDAN iM50 User Manual

EDAN iM50
317 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Patient Monitor User Manual Intended Use and Safety Guidance
- 7 -
CAUTION
18 When multiple parameters are simultaneously displayed and one of the parameter
values is close to the limit value, the waveform might get non-smooth, please take the
parameter value as the reference.
19 If the touch screen fails, use the rotary knob and keys and contact the service
personnel.
NOTE:
1 Position the device in a location where the operator can easily see the screen and
access the operating controls.
2 The monitor can only be used on one patient at a time.
3 If the monitor gets damp or liquid pours on the monitor, please contact the service
personnel of EDAN.
4 This monitor is not a device for treatment purposes.
5 The pictures and interfaces in this manual are for reference only.
6 Regular preventive maintenance should be carried out every two years. You are
responsible for any requirements specific to your country.
7 When there's measurement beyond range, invalid measurement or no measurement
value, it will display -?-.
8 In normal use, the operator shall stand in front of the monitor.
1.3 Explanation of Symbols on the Monitor
1
DEFIBRILLATION-PROOF TYPE CF APPLIED PART
2
DEFIBRILLATION-PROOF TYPE BF APPLIED PART
3
Caution
4
MR Unsafe - Keep away from magnetic resonance
imaging (MRI) equipment
5
Equipotentiality
6
Alternating Current

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EDAN iM50 and is the answer not in the manual?

EDAN iM50 Specifications

General IconGeneral
BrandEDAN
ModeliM50
CategoryMonitor
LanguageEnglish

Related product manuals