Patient Monitor User Manual User Interface
- 87 -
NOTE:
1 The user cannot change timer settings when a timer is running.
2 Do not use the timer to schedule critical patient-related tasks.
3 The timer function is not available in privacy mode or standby mode.
8.12 Profile
Select Menu > Maintenance > User Maintain > Profile, enter the required password, users can
save the current monitor’s configuration, delete the saved user configuration and rename it. Three
pieces of user configuration can be saved in the monitor. User can select as desire.
To set default configuration, select Menu > Profile. On the Profile menu, users can choose a
factory configuration (adult, pediatric or neonate) based on the patient category.
The one labeled with ● is current configuration. If there's no labeled configuration, it means the
currently used configuration is not one of them.
8.13 Neonatal Configuration*
* Only applicable to iM50 and M50.
Neonatal configuration is exclusively designed for neonate. When it is set to On, the patient type
is defaulted to be neonate and cannot be changed.
Neonatal configuration is not set by user. Contact the professionals authorized by the
manufacturer if needed.
To Next Page
Loading...
Need help?
General
