Warning, electric shock hazard.
According to IEC 61010, this symbol means that the documentation of
the device must completely be read and understood before installing and
commissioning of the device. Observe all safety related instructions in this
document.
1.3 Liability and guarantee
Emerson is not liable for damages that occur due to improper use. Proper use also includes
the knowledge of, and compliance with, this document.
Customer changes to the device that have not been expressly approved by Emerson will
result in the loss of guarantee.
Due to continuous research and further development, Emerson reserves the right to
change technical specifications without notice.
1.4 Incoming goods inspection
Check the content of the shipment to ensure that it is complete. Inspect the goods to
determine if the device has been damaged during transport. The following parts are at
least included in the scope of delivery and must be contained in the shipment:
• AMS Asset Monitor
• Quick Start Guide AMS Asset Monitor (MHM-97926-PBF)
If the contents are incomplete, or if you observe any defects, file a complaint with the
carrier immediately. Inform the responsible Emerson sales organization, so your device
can be replaced. In this case, attach a tag with customer name and the observed defect.
Additional parts are required to set up an operable system, see About the AMS Asset
Monitor hardware for details.
1.5 Technical support
You may need to ship this product for return, replacement, or repair to an Emerson
Product Service Center. Before shipping this product, contact Emerson Product Support to
obtain a Return Materials Authorization (RMA) number and receive additional instructions.
Product Support
Emerson provides a variety of ways to reach your Product Support team to get the answers
you need when you need them:
Phone
Toll free 1 800 833 8314 (U.S. and Canada)
+1 512 832 3774 (Latin America)
General Installation Guide
March 2024 MHM-97923-PBF
10 MHM-97923-PBF, Rev. 2.10
To Next Page
Loading...
Need help?
General
