October 2019
Installation, Operation and Maintenance Manual
MAN-02-04-97-0713-EN Rev. 1
8
Installation
Section 3: Installation
Section 3: Installation
3.1 Working Condition
Standard actuators are suitable for the following environment temperatures:
-20 °C +85 °C (-4 °F to +185 °F)
Special versions are available for extreme environment temperatures:
-40 °C +85 °C (-40 °F to +185 °F)
-55 °C +65 °C (-67 °F to +149 °F)
NOTICE
The above conditions apply only to Ex d or Ex de versions. For other applications, refer to
the applicable addendum.
NOTICE
Installation in an environment where the ambient temperature range falls outside the
rated temperature will invalidate the warranty. Refer to the nameplate to verify the rated
ambient temperature.
Figure 7
To Next Page
Loading...
Need help?
General
