How to Recue a Clip from the LSM-VIAViewer
To recue a loaded clip on its INpoint,
• Press + .
When a Remote Panel is linked to the LSM-VIAViewer, the Recue command applies to media
loaded on the PGMscontrolled by the Remote Panel, regardless of the Viewer pane which has
the focus on.
In case no Remote Panel is connected to LSM-VIA, the Recue command applies to the media
loaded on the smallest PGMof the server.
Loading Behavior
• In PGM+PRV control, pressing the clip position loads the preferred clip angle on the PGM and the
second preferred clip angle on the PRV.
• In PGM-only control, pressing the clip position loads the preferred clip angle on the PGM.
• In PRV-only control, pressing the clip position loads the preferred clip angle on the PRV.
• In Multi-PGM control, depending on the number of PGMs in the configuration, pressing the clip
position loads the preferred clip angle on PGM1, the second preferred clip angle on PGM2, the next
available clip angle on PGM3, ...
• In Single PGM control, pressing the clip position loads the preferred clip angle on the controlled PGM.
Loaded Clip Display
On the Remote Panel console, when a clip is loaded, the corresponding Function key (clip position) is
red.
On the LSM-VIAViewer Clip grid,
• a clip loaded on a PGMhas a red background
• a clip loaded on thePRV has a green background
120| January 2022 | Issue 1.4.G
To Next Page
Need help?
General