Operational Blocks and Operational Block Display (4 / 5 / 6)
The operational blocks (4 / 5 / 6) are groups of operational keys (4a, 5a, 6a) associated with a display
(4b, 5b, 6b) which shows the operations available based on the current Remote Panel mode. Each key
allows users to access two functions.
• The command displayed in the lower part of the key display is available when you press the key.
• The command displayed in the upper part of the key display is available when you press SHIFT and
then the given key.
For example:
The functions displayed vary depending on the activated mode.
If nothing is shown on the key display, no function is currently assigned to this key.
See the following sections for more details:
• "Commands on Left Operational Block" on page 29
• "Commands on Right Operational Block" on page 31
• "Commands on Bottom Operational Block" on page 34
See also the following sections for the functions available in specific modes:
• "Clip Mode Commands on the Remote Panel Console" on page 72
• "Playlist Mode Commands on the Remote Panel Console" on page 145
• "Edit Audio and Edit Video Modes Commands on the Remote Panel" on page 193
USER MANUAL
LSM-VIA |2. Touring the User Interface| 9
To Next Page
Loading...
Need help?
General
