How to Browse from a Mark Point to Another
The Browse function is only available when a mark point has been set on the current timecode of the
media, clip or train, loaded on the smallest controlled PGM.
The key button is red, and the key display is highlighted.
1. Press Browse .
The Browse mode is enabled.
2. Browse from one mark point to the next one or the previous one with the jog
The Browse function can be disabled when other actions are performed on the Remote, for example:
• press Browse again
• press E/E or Return
• press Play
• use the lever
Deleting Mark Points
How to Delete a Single Mark Point
1. Load a train on the smallest controlled PGM.
2. Browse to the mark point you want to delete.
or
The Mark key button lights up in red.
3. Delete the mark point: +
The mark point is deleted on all the record trains.
USER MANUAL
LSM-VIA |5. Working with Record Trains| 59
To Next Page
Loading...
Need help?
General
