FENDT 926 Vario User Manual

107
OPERATION
23.3 Wheel weights
Max. 4 x 295 kg may be mounted.
Operation_Pic_number:1
A = Starting torque 210 Nm.
B = When replacing screws, new screw
length 95 mm.
Starting torque 600 Nm.
NOTE:
No wheel load weights must project over the
tyres, otherwise they cannot be used on the
public highway.
WARNING:
Observe the maximum permissible
width indicated in the vehicle
documents.
Fig.256
23.4 Water ballasting of tyres
Operation_Pic_number:1
A = Fill with water.
B = Drain water.
L = Air.
W = Water.
Follow tyre manufacturer's specifications with re-
gard to volumes (water + antifreeze solution).
Check tyre pressures regularly.
Fig.257

FENDT 926 Vario Specifications

General

Brand	FENDT
Model	926 Vario
Category	Tractor
Language	English