139
CARE AND MAINTENANCE
1. General
Text-module
IMPORTANT:
Thoroughly clean the tractor, particularly
connections and components that need to be
opened, as well as the surrounding areas,
before performing any maintenance work.
Used oils, cooling- and brake fluids must be
disposed as per national laws. Dispose pro-
perly according to local environmental regu-
lation and to manufacturer's instructions any
used lubricant.
Oil level checks must be conducted when the
tractor is horizontal and stationary; if fitted,
front axle suspension should be in centre po-
sition.
For maintenance intervals, checks to be per-
formed, quantity and quality of lubricants to
be used, refer to Fluids and lubricants or
Maintenance schedule.
NOTE:
Picture catalogues of spare parts are availa-
ble on the internet at the following address.
www.fendt.com
- language
- service
- spare parts catalogue
WARNING:
Before any maintenance or repair
work and before opening the bonnet,
switch off the engine and remove the
ignition key. Apply the hand brake
and chock the wheels if necessary.
When working on the engine,
disconnect the battery at the
negative terminal.
When the maintenance work is
completed, replace all protective
and safety devices. Ensure that the
tractor is securely parked.
Ensure that the correct grades of
fuel and lubricants are used, and
store these in approved containers
only. See also TECHNICAL DATA
Fluids and Lubricants.
Do not perform any welding, drilling,
cutting or grinding on the cab or
safety frame. All damaged parts
must be replaced!
2. Opening the bonnet
Operation_Pic_number:1
● Release lock (A).
● Use the handle (B) to raise the bonnet.
NOTE:
Swing the bonnet closed with a bit of power.
Fig.1
To Next Page
Loading...
Need help?
General
