FENDT 926 Vario User Manual

63
OPERATION
15. Brakes
15.1 Foot brake
Operation_Pic_number:1
Operation_Pic_number:1
● For independent wheel braking (steering
clutch brake), unlock the brake pedals.
● Press the pedal for the inner wheel.
NOTE:
Use the steering clutch brake only at low
speeds, and never jerk it; do not use with the
differential lock engaged.
DANGER:
Before each trip, always check the
brakes.
DANGER:
On normal roads, and when pulling
trailers equipped with air brakes,
lock the brake pedals together
(independent wheel braking is not
permitted).
Fig.107
Fig.108
15.2 Hand brake
Hand brake
Operation_Pic_number:1
Text-module
When the hand brake (A) is applied, the trans-
mission is automatically shifted to neutral posi-
tion, if speed goes under 2 km/h within 2 secs..
Displays when in neutral position
Operation_Pic_number:1
Text-module
ETNum-list
Text-module
● When the parking brake is activated, the neu-
tral position can be cancelled with the neutral
button (N) (Starting assistance).
If the hand brake is not released within 30 se-
conds, or the speed is not above 2 km/h, the
transmission returns to neutral.
DANGER:
When parking the tractor, always
immobilise with the hand brake; on
slopes, also place chocks at the
wheels.
1.LED (N1) lights up.
2.Direction of travel indicator lamps (C) are
flashing.
3.Clock and operating hours (D) are shown on
the multiple display.
Fig.109
Fig.110

FENDT 926 Vario Specifications

General

Brand	FENDT
Model	926 Vario
Category	Tractor
Language	English