59
OPERATION
13. Front axle suspen-
sion
Operation_Pic_number:1
Function can only be selected while the engine
is running.
DANGER:
When the tractor is stationary,
raising or lowering the tractor body
is dangerous for people in the
vicinity of the front axle.
Fig.101
ETNum-list
NOTE:
When the tractor is started, the function se-
lected last is activated.
Suspension OFF (locked).
Tractor body is lowered to the stop at the
front axle.
Suspension ON (level control).
With the tractor stopped:
If the button is pressed for more than
3 seconds, the body continues to rise
through the total suspension range, as
long as the button remains pressed.
Only when speed exceeds 2 km/h. will
the frame adjust automatically to the in-
termediate position of the suspension
range.
At speeds above 2 km/h:
By pressing key, tractor frame is raised
and its height maintained in the
intermediate position of suspension
range.
Levelling control may be temporarily
deactivated for one of the following factors:
1.brakes are applied.
2.ground speed is below 2 km/h.
3.front axle load too high.
To Next Page
Loading...
Need help?
General
