FENDT 926 Vario User Manual

229
FAULTS AND REMEDIAL ACTIONS
5. Fault code tables
Text-module
General
Text-module
Electronic engine control
Fault code Cause Effect and remedy
0.0.11 Data transfer from No forward/reverse indicator,
0.0.12 Tractor electronic system for 4-WD, diff. lock and
0.0.13 instrument cluster inoperative. Front/rear PTO speed.
0.0.14
0.0.15
0.0.16
0.0.17
0.0.18
0.0.1A
0.0.20
0.0.1B Variotronic Ti data transfer
faulty.
Auxiliary operation.
0.0.1F Joystick data transfer faulty. Valves, electronic accelerator, transmis-
sion functions not functioning.
0.1.50 Combination instrument not
programmed.
Programme combination instrument.
0.1.51 Engine oil pressure sensor
faulty.
No more monitoring of engine oil pres-
sure.
0.1.54 Sensor for compressed air sup-
ply is faulty.
Display no longer valid.
0.1.55 Hydraulic oil supply sensor
faulty.
No monitoring of hydraulic oil level.
0.1.56 Engine temperature sensor
faulty.
Engine temperature is not monitored.
0.1.57 Charge air temperature sensor. No monitoring of intercooler temperature.
0.1.59 Sensor for fuel supply faulty. No monitoring of fuel supply indicator.
Fault code Cause Effect and remedy
1.1.01 EDC control unit line disconti-
nuity.
Normal operation - fault indication.
1.1.03 Foot throttle potentiometer
plausibility error.
Accelerator pedal mode not functioning.
1.1.04 Tractor Management System
(TMS) checksum error.
Tractor Management System (TMS) not
functioning, EOL programming.
1.1.05 Engine configuration could not
be read by the electrical engine
control module.
Tractor Management System (TMS) not
operational.
1.1.7 E FENDT control unit, line dis-
continuity.
Loss of enhanced features, only foot
throttle available.
1.1.7F Hand throttle memory buttons
faulty.
Loss of enhanced features, only foot
throttle available.
1.1.9 E Operating console, line discon-
tinuity.
Loss of enhanced features, only foot
throttle available.
1.1.9F Operating console, line discon-
tinuity.
Loss of enhanced features, only foot
throttle available.
1.1.A0 Connection to EDC control unit,
EDC control unit faulty.
Normal operation - fault indication.
1.1.A1 FENDT control module to EDC
control module connection
faulty.
Reduced engine power.

FENDT 926 Vario Specifications

General

Brand	FENDT
Model	926 Vario
Category	Tractor
Language	English