Fronius CMT 4000 Advanced User Manual

CMT Remote control panel
General The CMT Remote control panel is fitted to the CMT Remote power source and CMT
Advanced power source. The CMT Remote power source and CMT Advanced power
source are designed for automated and robot applications and are controlled exclusively
via the LocalNet.
The CMT Remote power source and CMT Advanced power source can be operated via
the following system add-ons:
- RCU 5000i remote control
- ROB 5000 robot interface
- Field bus systems
CMT Remote and
CMT Advanced
control panel
CMT 4000 Advanced
(3)
(2)
(1)
No. Function
(1) Error indicator
lights up if an error has occurred. The corresponding error message is dis-
played on all devices connected to the LocalNet that have a digital display.
The error messages displayed are described in the section headed
“Troubleshooting”.
(2) Robot interface indicator
lights up when the power source is switched on and a robot interface or field
bus system is connected to the LocalNet
(3) Power source ON indicator
lights up for as long as the mains cable is plugged in and the mains switch is in
the “I” position
65
EN
Toowoomba Welding Supplies : tweld.com.au : Ph +61 7 4659 0044

Fronius CMT 4000 Advanced Specifications

General

Brand	Fronius
Model	CMT 4000 Advanced
Category	AC Power Distribution
Language	English