Process setup menu
General The Process setup menu provides simple access to expert knowledge in the power
source and to additional functions. The Process setup menu can be used to make simple
adjustments of the parameters to the various job settings.
The Process setup menu can be accessed using the Comfort, US, TIME 5000 Digital
and CMT control panels.
Process setup
menu for the
Comfort, US,
TIME 5000 Digital
and CMT control
panels
Setting process parameters is described here with reference to the MIG/MAG standard
synergic welding process. The procedure for changing other process parameters is
identical.
Process setup menu: Overview
Opening the Process setup menu
1
Use the Process button to select the
"MIG/MAG Standard Synergic" weld-
ing process
2
Press and hold the Store button
3
Press the Process button
4
Release the Store button
The power source is now in the setup
menu for the MIG/MAG standard syn-
ergic welding process - the last para-
meter that was selected is displayed.
Changing welding parameters
5
Use the Process button to select the
desired parameter
6
Use the adjusting dial to change the
parameter value
Exiting the Setup menu
7
Press the Store button
Parameters for
MIG/MAG welding
in the Process
setup menu
The parameters available in the Process setup menu are described below for the follow-
ing MIG/MAG welding processes:
- MIG/MAG pulse synergic welding
- MIG/MAG standard synergic welding
- MIG/MAG standard manual welding
- CMT welding
- TIME welding
"Minimum" and "maximum" are used for setting ranges that differ according to power
source, wire-feed unit, welding program, etc.
144
Toowoomba Welding Supplies : tweld.com.au : Ph +61 7 4659 0044
To Next Page
Loading...
Need help?
General
