Operations during Copying
101
Copy
3
Changing the Number of Copies
To change the number of copy sets during scanning or copying, use the following
procedure.
1 Press either the <Stop> button on the control panel or [Delete] on the touch screen.
2 Select [Change Quantity].
3 Specify the number of copy sets with the numeric keypad.
The new quantity must include the number of copies that have already been printed. You
cannot enter a number less than the number of copies that have already been printed.
4 Press the <Start> button.
z
If you enter the same value as the number of copies that have already been printed, the machine will not
execute a copy job even when you press the <Start> button.
123
456
789
0
＃
C
To Next Page
Loading...
Need help?
General
