Scan
380
Scan
5
z
Port Number
z
To delete the input data and return to the [Server Address Book] screen, select [Cancel].
z
For more information on the setting items, refer to "Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
11 When the settings are completed, select [Registered].
z
To return to the previous screen, select [Back].
Specifying a Destination PC Using a One Touch Button
You can use the one touch buttons to specify the server name, the user name used for login
to the destination server or other computers, and other information from the Address Book.
One touch buttons correspond to the address numbers from 0001 to 0052, or 0001 to
0045.
For example, when the number you want to dial is registered to the address number 0001,
press one touch button <1>.
z
One touch buttons can be used when the Fax service is available.
z
There are two ways in which address numbers and stored programs are assigned to the one touch buttons.
Select either of the following. By default, [Type 1] is selected.
z
[Type 1]
The buttons 1 to 52 are used for address numbers and they correspond to the registered address numbers
0001 to 0052, while the buttons 53 and 54 are used for stored programs and they correspond to the
registered stored programs 1 and 2.
z
[Type 2]
The buttons 1 to 45 are used for address numbers and they correspond to the registered address numbers
0001 to 0045, while the buttons 46 to 54 are used for stored programs and they correspond to the
registered stored programs 1 to 9.
To Next Page
Loading...
Need help?
General
